Author Topic: Carver M-400  (Read 7961 times)

Offline OCCD

  • Woof
  • Ready For Intervention!
  • ******
  • Posts: 1741
  • Karma: +0/-0
  • glub glub glub
    • Vintage HiFi of Pittsburgh
Carver M-400
« on: December 08, 2009, 09:14:58 PM »
Just snagged this also. I have been hammering it for the last hour. Very nice amp. It has been several years since I have had one of these.

[attachment deleted by admin]
Do you want ants? Because THAT'S HOW YOU GET ANTS!

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Carver M-400
« Reply #1 on: December 08, 2009, 09:17:19 PM »
very nice!
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline Kingman

  • Southern Commander
  • *****
  • Posts: 3127
  • Karma: +0/-0
  • OCCD...I GOT IT BADD!!!!!!!!!
Re: Carver M-400
« Reply #2 on: December 08, 2009, 09:50:44 PM »
I acquired one of these a few months ago...black version. I must say it has the same sonic quality as the rest of my Carver amps and performed great. I could't believe the power Bob put in that small chassis! As soon as I move my system to a larger room with my new rack I purchased, I'll probably use it to power a sub mono. If anyone has the chance to pick one of these up, do it!!! :D
IN REALITY IT ONLY MATTERS WHAT IT SOUNDS LIKE TO YOU!!!!!

Offline OCCD

  • Woof
  • Ready For Intervention!
  • ******
  • Posts: 1741
  • Karma: +0/-0
  • glub glub glub
    • Vintage HiFi of Pittsburgh
Re: Carver M-400
« Reply #3 on: December 08, 2009, 09:54:45 PM »
I acquired one of these a few months ago...black version. I must say it has the same sonic quality as the rest of my Carver amps and performed great. I could't believe the power Bob put in that small chassis! As soon as I move my system to a larger room with my new rack I purchased, I'll probably use it to power a sub mono. If anyone has the chance to pick one of these up, do it!!! :D


YEAH!!! WHAT HE SAID. :-*
Do you want ants? Because THAT'S HOW YOU GET ANTS!

Offline thuffman03

  • Zen Master
  • *****
  • Posts: 1097
  • Karma: +0/-0
  • CarverFest Evictee
Re: Carver M-400
« Reply #4 on: December 08, 2009, 11:53:26 PM »
That is a pretty nice amp!
Got Carver?

Offline Falcon

  • Polk Killer
  • ****
  • Posts: 1131
  • Karma: +0/-0
Re: Carver M-400
« Reply #5 on: December 09, 2009, 01:52:10 AM »
Is that stereo?? what is the specs on the little guy?

Offline Kingman

  • Southern Commander
  • *****
  • Posts: 3127
  • Karma: +0/-0
  • OCCD...I GOT IT BADD!!!!!!!!!
Re: Carver M-400
« Reply #6 on: December 09, 2009, 06:08:12 AM »
Is that stereo?? what is the specs on the little guy?
Here are the technical specs:

Power output:
 200W RMS per channel into 8 ohms from 20Hz to 20kHz, <0.05% THD
 
Power at clipping:
 250W RMS per channel into 8 ohms at 1kHz, 300W into 4 ohms at 1kHz
 
Bridged power output:
 500 W RMS into 8 ohms
 

  
  
« Last Edit: December 09, 2009, 06:13:12 AM by Kingman »
IN REALITY IT ONLY MATTERS WHAT IT SOUNDS LIKE TO YOU!!!!!

Offline Falcon

  • Polk Killer
  • ****
  • Posts: 1131
  • Karma: +0/-0
Re: Carver M-400
« Reply #7 on: December 09, 2009, 05:39:19 PM »
Thanks Kingman.
Wow, all that in that itty bitty amp :o  Leave it to Bob Carver to make that happen.

Offline thuffman03

  • Zen Master
  • *****
  • Posts: 1097
  • Karma: +0/-0
  • CarverFest Evictee
Re: Carver M-400
« Reply #8 on: December 09, 2009, 10:36:58 PM »
Update....OCCD has two of these now.  They would look pretty cool sitting beside each other on someones audio rack!  BTW 500 watts in bridged mode! :o
Got Carver?

BB3

  • Guest
Re: Carver M-400
« Reply #9 on: December 10, 2009, 10:53:39 AM »
Beautiful Tom. Just Beautiful. :P------BILL

Offline Kingman

  • Southern Commander
  • *****
  • Posts: 3127
  • Karma: +0/-0
  • OCCD...I GOT IT BADD!!!!!!!!!
Re: Carver M-400
« Reply #10 on: December 10, 2009, 06:59:32 PM »
Update....OCCD has two of these now.  They would look pretty cool sitting beside each other on someones audio rack!  BTW 500 watts in bridged mode! :o
The other one the same color??? Give us a pic. :-*
IN REALITY IT ONLY MATTERS WHAT IT SOUNDS LIKE TO YOU!!!!!

Offline OCCD

  • Woof
  • Ready For Intervention!
  • ******
  • Posts: 1741
  • Karma: +0/-0
  • glub glub glub
    • Vintage HiFi of Pittsburgh
Re: Carver M-400
« Reply #11 on: December 10, 2009, 07:13:21 PM »
Kingman, what would you recommend to clean the aluminum on these?
Do you want ants? Because THAT'S HOW YOU GET ANTS!

Offline Kingman

  • Southern Commander
  • *****
  • Posts: 3127
  • Karma: +0/-0
  • OCCD...I GOT IT BADD!!!!!!!!!
Re: Carver M-400
« Reply #12 on: December 10, 2009, 08:18:53 PM »
It's a very difficult job not to be handled by amateurs. Send them to me and I will take care of cleaning them. :P :P :P
IN REALITY IT ONLY MATTERS WHAT IT SOUNDS LIKE TO YOU!!!!!

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Carver M-400
« Reply #13 on: December 12, 2009, 01:43:20 PM »
Update....OCCD has two of these now.  They would look pretty cool sitting beside each other on someones audio rack!  BTW 500 watts in bridged mode! :o

here's one way to put them to work...
http://pittsburgh.craigslist.org/ele/1506990360.html
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline mikey813

  • Audio Connoisseur
  • ****
  • Posts: 538
  • Karma: +0/-0
Re: Carver M-400
« Reply #14 on: January 04, 2010, 09:21:43 PM »
Very nice tom and also Kingman that black M-400 is cool looking.
True Image CM-2500, Terra Song SS-1, Denon       DCD-1520, Sony CA8es, Kef K140, Definitive Technology DR-7
youtube-
http://www.youtube.com/user/Callof813