Author Topic: 1962 Magnavox 8802 Resto-Mod Project  (Read 17553 times)

SunnyDaze

  • Guest
1962 Magnavox 8802 Resto-Mod Project
« on: June 22, 2013, 12:25:32 PM »
I bought this amp from Ian (vstakrwell). Special thanks to Tom, Dan, and Mark for sharing their experience and skill in helping me complete this job.

Stuff I did: Replaced the .0047 and .047 coupling caps with .01 and .1 caps, respectively, added the kick-ass rhodium speaker binding posts, added additional RCA jacks for daisy-chaining, added a 30 amp rocker switch for power, changed all out of spec resistors, changed the output stage wiring to 10 gauge, changed the power wire to 10 gauge with a 3 amp fuse holder in line, added a Sunfire knob to the hum pot, added red Oak sides, put a detachable power cable on the rear panel, polished the chassis, and um... If I think of anything else, I'll add it.

This amp sounds AMAZING with the Klipsch KG 5.2s.








Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #1 on: June 22, 2013, 12:32:42 PM »
Very nice work!
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline Kingman

  • Southern Commander
  • *****
  • Posts: 3127
  • Karma: +0/-0
  • OCCD...I GOT IT BADD!!!!!!!!!
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #2 on: June 22, 2013, 12:58:42 PM »
Very nice!!!!! Congrats!  :)
IN REALITY IT ONLY MATTERS WHAT IT SOUNDS LIKE TO YOU!!!!!

Offline Reverend

  • Ready For Intervention!
  • ******
  • Posts: 2162
  • Karma: +0/-0
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #3 on: June 22, 2013, 02:27:32 PM »
Great Job! I'm sure it sounds awesome.

Offline vstarkwell

  • Double Secret Probation!
  • **
  • Posts: 179
  • Karma: +0/-0
  • Bass!!!!!!!!!
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #4 on: June 22, 2013, 02:39:11 PM »
Very cool SD!!!!!, I dreamed of doing this myself but alas I have neither the skills or patience to have pulled this off. Where's the Magnavox logo pin????

SunnyDaze

  • Guest
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #5 on: June 22, 2013, 02:44:55 PM »
It's still in the box, Ian.

I haven't had a chance to pick up any trim adhesive since I finished the wood. Don't worry, it'll be on there before it's all said and done!

Thanks again for the amp. I'm sure you could have pulled this off!

Offline Sir Thrift-a-Lot

  • Ready For Intervention!
  • ******
  • Posts: 3813
  • Karma: +1/-0
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #6 on: June 22, 2013, 04:17:15 PM »
Looks great!

Offline schwarcw

  • Ready For Intervention!
  • ******
  • Posts: 1625
  • Karma: +0/-0
  • No one here gets out alive!
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #7 on: June 22, 2013, 04:35:09 PM »
Congrats SD!  That looks really cool!  I'll bet it sounds great. ;D
Carl

bmwr75

  • Guest
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #8 on: June 22, 2013, 05:40:17 PM »
Beautiful work Elijah!!  That is one nice looking amp.  You need to bring it to the house and audition speakers you might want.  I still got way too many.

SunnyDaze

  • Guest
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #9 on: June 22, 2013, 06:04:49 PM »
You know which speakers I want, Scott.

Unfortunately you shot me down today when I texted you about them.

Maybe I'll stop by tomorrow if you're around.

bmwr75

  • Guest
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #10 on: June 22, 2013, 06:17:35 PM »
I got others.   ;D

bmwr75

  • Guest
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #11 on: June 22, 2013, 06:21:20 PM »
Might part with these.  Tyler Acoustics PD-10s.  Shown below was copied from Ty's website.

PD10's
Shown in premium Rosewood with optional Rear ported
Drivers: 1 - 12" woofer and 1 - horn tweeter

Freqency Response: 45-20k
Sensitivity: 97db
Impedance: 8 ohms
Power: 1-400wpc
Size: 14 x 14 x 24
Weight: 70 lbs each

List price: $2,800 pr/US
Factory Direct: $1,800 pr/US
Premium finishes and upgrades extra


SunnyDaze

  • Guest
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #12 on: June 22, 2013, 06:42:32 PM »
I'd probably stay with my 5.2's over the Tylers. I'm getting solid output down to 35 Hz. I don't want to give that up. :)

OldiesButGoodies

  • Guest
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #13 on: June 22, 2013, 06:47:30 PM »
Looks great!!!  better than you hinted at last night.  Are you a tubist now?

Offline StephenWVU

  • Audio Geek!
  • ***
  • Posts: 357
  • Karma: +0/-0
Re: 1962 Magnavox 8802 Resto-Mod Project
« Reply #14 on: June 22, 2013, 06:55:28 PM »
Very nice work! I might be picking up a 6v6 Magnavox. Maybe I will let you schnaz it up! :P Glad you like it! Maybe one of these days I will get to give it a listen! I could probably even get a good salsa record to try it out!  :P Just kidding, but seriously I bet that amp with your speakers sounds great.
Speakers: Nearfield Acoustics Pipedreams Reference 18
Amplifier:
Mark Levinson ML3 (subs)
Phison A2.120SE (towers)
Preamplifier/DAC/Phono: Phison PD2SE
Server: Pi & NUC
Turntable: VPI HR-X, VdH Colibri XGW